Quality Control Inspector
Salary undisclosed
Apply on
Original
Simplified
Company Profile
Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.
Position Summary
Purpose
The quality control inspector will be required to comprehend specifications to determine testing / inspection procedures and equipment to be used. The candidate must be able to read dials or digital displays, compare results with specifications and record test / inspection data, confer with engineers, technicians and production personnel. Must be able to demonstrate the ability to perform dimensional checks and visual verifications of raw material, fasteners, fabricated and machined parts including coating to acceptance criteria. Document and track non-conformance reports / material. Ability to work with minimal instruction and supervision.
Duties & Responsibilities
Functions
Essential
¿ Responsible for performing inspections on materials, products, assemblies, sub-assemblies.
¿ Ability to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary.
¿ Demonstrate advanced ability to perform dimensional checks and visual verifications of fabricated and machined parts to acceptance criteria.
¿ Uses measurement, test equipment and functional gauges to determine if product meets all stated requirements.
¿ Validate the quality of machined and fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria.
¿ Perform and then prepare and provide inspection reports for NDT such as MPI, LPI, hardness testing, ferrite testing and PMI.
¿ Understand and adheres to requirements of Gauge Calibration including performing internal calibration on measurement devices held.
¿ Interpret inspection results
¿ Advises on and assists in developing and modifying existing procedures and providing results.
¿ Mentors or gives technical guidance to junior inspectors and technicians.
¿ Performs a range of tasks with autonomy and may act as a cross departmental technical lead.
¿ Applies a range of techniques and standards autonomously.
¿ Shall be utilized as subject matter expert in quality control techniques.
¿ Often serves as a resource to others in the resolution of complex problems.
¿ Ensure all existing working procedures, practices and systems are followed.
¿ Ensure in date calibrated measuring equipment is used for performing inspection
¿ Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control
¿ Issue, investigate and track non conformance records ultilising relevant SmartSolve modules.
¿ Shall be capable of completing inspections, such as: FAT, SIT, FAI, In-Process, Final, Receiving inspections
¿ Work as a team member when performing or witnessing inspection anor testing for internal and external customers, third parties, customer's inspectors, and engineering / manufacturing representative.
¿ Displays advanced professional communication and interpersonal skills when exchanging information with peers, line managers and external representatives (e.g. 3 rd Party inspectors).
¿ Assist in developing and improving quality system procedures, work instructions, flow charts and associated process improvements.
¿ Uses safe material handling and preservation techniques, such as, operating a forklift and jib cranes, packing/preservation to prevent deterioration or damage.
¿ Product identification responsibilities include verification and / or physical product marking for traceability
¿ Support the customer satisfaction and loyalty processes.
¿ Support the organization's drive towards excellence in Health and Safety performance.
¿ Support includes but is not limited to participating in STOP observations, reporting HSE observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager.
Non-essential
¿ Other duties as assigned
Supervisory Responsibilities
¿ This position has NO direct supervisory responsibilities.
Reporting Relationship
¿ This position will report to the Snr Mgr Eastern Hemisphere Quality.
Qualifications
Qualifications
Required
¿ Minimum of 3-5 years experience and/or training; or equivalent combination of education and experience
¿ Knowledge of ISO 9001 requirements
¿ Knowledge and experience in the use of advanced quality inspection techniques
¿ Working knowledge of Microsoft Word and Microsoft Excel..
¿ Knowledge in NDT methodologies – PCN qualification in Magnetic Particle and/or Liquid Penetrant
DESIRED
¿ Technical qualification (HNC / HND, SVQ)
¿ Proficient in Microsoft Office
¿ Knowledge of ISO 17020 and ISO 17025
Knowledge, Skills, Abilities, And Other Characteristics
¿ Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations
¿ Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
Closing Statement
Working Conditions
This position is considered SHOP WORK which is characterized as follows.
¿ Generally work performed indoors (80%) and occasional outdoors (20%).
¿ Occasional exposure to airborne vapour in the workplace
¿ Work surface is stable (flat)
¿ Requires a great deal of manual dexterity, such as working with measuring and testing equipment, marking and hand/power tools.
Physical Activity/Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This position is considered LIGHT work.
OCCASIONAL
FREQUENT
CONSTANT
¿ Lift up to 35 pounds (max)
¿ Climbing, stooping, kneeling, squatting, and reaching
¿ Lift up to 10 pounds
¿ Standing
¿ Repetitive movements of arms and hands
¿ Sit with back supported
Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.
Position Summary
Purpose
The quality control inspector will be required to comprehend specifications to determine testing / inspection procedures and equipment to be used. The candidate must be able to read dials or digital displays, compare results with specifications and record test / inspection data, confer with engineers, technicians and production personnel. Must be able to demonstrate the ability to perform dimensional checks and visual verifications of raw material, fasteners, fabricated and machined parts including coating to acceptance criteria. Document and track non-conformance reports / material. Ability to work with minimal instruction and supervision.
Duties & Responsibilities
Functions
Essential
¿ Responsible for performing inspections on materials, products, assemblies, sub-assemblies.
¿ Ability to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary.
¿ Demonstrate advanced ability to perform dimensional checks and visual verifications of fabricated and machined parts to acceptance criteria.
¿ Uses measurement, test equipment and functional gauges to determine if product meets all stated requirements.
¿ Validate the quality of machined and fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria.
¿ Perform and then prepare and provide inspection reports for NDT such as MPI, LPI, hardness testing, ferrite testing and PMI.
¿ Understand and adheres to requirements of Gauge Calibration including performing internal calibration on measurement devices held.
¿ Interpret inspection results
¿ Advises on and assists in developing and modifying existing procedures and providing results.
¿ Mentors or gives technical guidance to junior inspectors and technicians.
¿ Performs a range of tasks with autonomy and may act as a cross departmental technical lead.
¿ Applies a range of techniques and standards autonomously.
¿ Shall be utilized as subject matter expert in quality control techniques.
¿ Often serves as a resource to others in the resolution of complex problems.
¿ Ensure all existing working procedures, practices and systems are followed.
¿ Ensure in date calibrated measuring equipment is used for performing inspection
¿ Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control
¿ Issue, investigate and track non conformance records ultilising relevant SmartSolve modules.
¿ Shall be capable of completing inspections, such as: FAT, SIT, FAI, In-Process, Final, Receiving inspections
¿ Work as a team member when performing or witnessing inspection anor testing for internal and external customers, third parties, customer's inspectors, and engineering / manufacturing representative.
¿ Displays advanced professional communication and interpersonal skills when exchanging information with peers, line managers and external representatives (e.g. 3 rd Party inspectors).
¿ Assist in developing and improving quality system procedures, work instructions, flow charts and associated process improvements.
¿ Uses safe material handling and preservation techniques, such as, operating a forklift and jib cranes, packing/preservation to prevent deterioration or damage.
¿ Product identification responsibilities include verification and / or physical product marking for traceability
¿ Support the customer satisfaction and loyalty processes.
¿ Support the organization's drive towards excellence in Health and Safety performance.
¿ Support includes but is not limited to participating in STOP observations, reporting HSE observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager.
Non-essential
¿ Other duties as assigned
Supervisory Responsibilities
¿ This position has NO direct supervisory responsibilities.
Reporting Relationship
¿ This position will report to the Snr Mgr Eastern Hemisphere Quality.
Qualifications
Qualifications
Required
¿ Minimum of 3-5 years experience and/or training; or equivalent combination of education and experience
¿ Knowledge of ISO 9001 requirements
¿ Knowledge and experience in the use of advanced quality inspection techniques
¿ Working knowledge of Microsoft Word and Microsoft Excel..
¿ Knowledge in NDT methodologies – PCN qualification in Magnetic Particle and/or Liquid Penetrant
DESIRED
¿ Technical qualification (HNC / HND, SVQ)
¿ Proficient in Microsoft Office
¿ Knowledge of ISO 17020 and ISO 17025
Knowledge, Skills, Abilities, And Other Characteristics
¿ Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations
¿ Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
Closing Statement
Working Conditions
This position is considered SHOP WORK which is characterized as follows.
¿ Generally work performed indoors (80%) and occasional outdoors (20%).
¿ Occasional exposure to airborne vapour in the workplace
¿ Work surface is stable (flat)
¿ Requires a great deal of manual dexterity, such as working with measuring and testing equipment, marking and hand/power tools.
Physical Activity/Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This position is considered LIGHT work.
OCCASIONAL
FREQUENT
CONSTANT
¿ Lift up to 35 pounds (max)
¿ Climbing, stooping, kneeling, squatting, and reaching
¿ Lift up to 10 pounds
¿ Standing
¿ Repetitive movements of arms and hands
¿ Sit with back supported
Similar Jobs
